- Ideal for all home kitchens and bathrooms as well as medical facilities/offices, salons and spas
- High quality water without fluoride, lead, mercury, chlorine, arsenic, chromium 6, cadium, bacteria, radium, uranium, VOCs, THMs, chloramines, sodium nitrates, micro-organisms, and pharmaceutical drugs
- Infuses water with natural necessary minerals and molecular hydrogen for rapid hydration, raises pH to a level of 8.5-9.7 for the body’s natural internal balance for health
- Results in refreshing, high quality alkaline water–perfect for drinking, cooking and for personal care rituals.
The pH 5 micron sediment water filter cartridge removes extra fine sand, dirt, silt, rust, and scale particles from your household water. This 10 inch water filter is constructed with spun-bond polypropylene for higher purity and chemical compatibility and increased resistance to chemical and bacterial attack.
The pH GAC Series cartridges effectively reduce unwanted tastes, odor and chlorine taste & odor from your drinking water. They are designed to allow maximum contact between the water and carbon, ensuring maximum adsorption.
The construction of the cartridge allows water to enter at one end and pass through the entire length of the carbon bed before exiting the other end of the cartridge, while an internal expansion pad minimizes channeling or bypass. Before the water exits the cartridge, a 20-micron post filter helps reduce carbon fines and other suspended particles from the filtered water. The post-filter is permanently fastened to an innovative support basket ensuring that it is firmly secured and eliminating any potential for bypass.
This pH CBC-10 carbon filter cartridge reduces fine sediment, chlorine taste and odor, and protozoan cysts in residential and commercial drinking water. It has a nominal (85%) filtration rating of 0.5 micron, and 99.95% efficiency for the reduction of protozoan cysts. It will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 90% in up to 4,500 gallons at a flow rate of 2 gallons per minute (gpm). This cartridge is made of bonded powdered activated carbon (PAC) filter media wrapped in polyolefin with polyethylene outer netting. The nitrile butadiene rubber (Buna-N) gaskets seal the cartridge against the housing (sold separately). The cartridge has an initial pressure drop of 3.7 pounds per square inch (psi) at a flow rate of 2 gallons per minute (gpm), and operates over a temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees C). This carbon block filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for purification of residential and commercial drinking water.
|Materials certification||NSF/ANSI standard 42|
Phase 4: Membrane pH-RO 75 GPD
This membrane only has 1 gallon of waste per one gallon of product: a 1 to 1 ratio. Other membranes use up to 5 to 1 ratio, which means a waste of 5 gallons of water to make 1 gallon. The pH GRO is good for the environment and good for your water bill as well!
NSF 58 listed
pH Prescription Hydrogen / Mineral Filter. It offers premium quality H2, Mg, K, Ca, Na water and provides far better results than ordinary calcite alkaline filters. This filter has extended benefits including increasing the pH of tap water to 9.7, achieving an Oxidation Reduction Potential of up to -600mv. This filter provides an abundance of Active Hydrogen (H2) up to 1.3ppm.
This filter system will produce:
-Hydrogen up to 1.3ppm
-pH up to 9.7
-ORP up to -600
-Bio Available Minerals up to 50 ppm
Phase 6:Coconut Carbon
A renewable and natural resource, specialized Coconut Carbon is ideal for filtration on multiple levels: it has a high percentage of micropores to polish the water to reduce any residual PFOs, VOCs (Volatile Organic Compounds), THMs (Trihalomethanes) and infuses a clean, crisp taste to water. This filter does not cause allergic reactions, the result is finely filtered odor-free water.
Other TDS contaminants reduced by up to 98%: Aluminum, Ammonium, Bicarbonate, Calcium, Chlorine, Chloromines, Chromate, Cyanide, Ferro cyanide, Iron, Magnesium, Mercury, Manganese, Pharmaceutical residue, Phosphate, Silicate, Silver, Sodium, Strontium, Sulfate, Sulfite, Thiosulfate, Zinc.
1When system is used and maintained as directed.
Results may vary depending on regular maintenance, general condition of unit, and initial water conditions.